Google Ads for tradies: tracking, waste and what it costs
How Google Ads works for a tradie, and four lessons from accounts we run: clean conversion tracking, phone clicks, weekday schedules and negative keywords. No promises, just what we saw.
On this page
Google Ads can work for a tradie, but only if the website turns a click into a call and the tracking tells you the truth about which clicks did. Most of what goes wrong is not the keywords. It is the counting, the schedule and the searches you pay for by accident. This post covers four lessons from local service accounts we manage. We make no promises about leads or revenue, and the numbers below come from single accounts, so treat them as examples.
This post is the how-to. For what we do, the price and the proof, see Google Ads for tradies.
How does Google Ads work for a tradie?
You bid on searches such as "blocked drain" or "switchboard upgrade", and Google shows your ad to people near you who type something close to it. You pay when someone clicks. The ad lands on a page on your site, and the page has to do the rest: a tappable number, a short form, proof of real work.
If the page is weak, the ad only speeds up how fast you lose customers. We cover the page side in plumber and electrician website design and tradie websites that get the call.
A first campaign is best kept narrow. We set up one for a regional builder with two Search campaigns, a small daily budget for each, targeting limited to the councils and postcodes the builder works in, and one ad group and landing page per service. The detail, including what broke on launch day, is in how we structured a first Google Ads campaign for a builder. One setting worth copying: target people physically in your area, not people who show interest in it.
Lesson 1: conversion tracking decides everything
Google Ads, and its automatic bidding, trust the conversion column. If the column is wrong, every decision made from it is wrong.
An appliance repair business we manage showed about ten times as many conversions as real enquiries over 30 days. The real enquiries were form submissions, phone number clicks on the website and calls from ads. The rest came from actions Google creates or hosts itself, mainly taps on the call button inside the ad (a bit over a third of all conversions) and map activity such as directions and engagements (about two fifths). They were counted by default, so cost per lead looked far better than it was.
The fix was to move the real phone click into a lead goal and turn off the default contact goal. It deleted nothing. The lesson is to open Goals, then Summary, and check every action: its source, whether it is primary and which campaigns use it. We wrote it up in Google Ads conversions inflated.
Tracking can also fail the other way. On another client site, a security setting blocked Google's tags for about three months and the numbers simply stopped. See Google Ads tracking that looked fine and recorded nothing.
Lesson 2: phone clicks are not all calls
For tradies, the phone is the main conversion, so it matters what counts as one. On the appliance repair account, the old rule counted any event with "phone" in its label. Over a fortnight in September, the site recorded 130 phone events. 108 were real taps on a phone number link. 22 were people clicking into the phone box of the contact form, which is not a call.
The fix was a single listener that records a phone click only on links that start with tel:. Keep taps and calls from the ad as separate actions, test on a real phone, and compare the totals with your own call log. A gap of several times means the counting is broken. Details in phone click tracking that counts the wrong clicks.
Lesson 3: why does Google Ads spend drift from what you agreed?
Spend drifts from the agreed settings more easily than most owners expect, and the drift rarely works in the owner's favour. On one local service account we manage, a weekday-only schedule still spent on weekends, a temporary budget rise was still in place two days after it should have ended, and a larger budget bought fewer clicks. We compare the live settings with the agreed ones every day for that reason.
A schedule that leaks. The owner runs ads Monday to Friday only, by choice. Google still reported small amounts of weekend spend, far below a weekday but not zero. That means the schedule was not excluding those days on at least one setting. A schedule can be set on one campaign and missing on another, or overridden by another setting. A quiet weekend is not a performance problem when the schedule is deliberate, so judge the account on the days it runs.
A temporary rise that did not end. We agreed to raise one campaign's daily budget by 50% for a single day. The revert was a line in a tracking file that nobody ticked, and two days later the budget was still raised. By mid-afternoon the account had spent about twice its September daily average. The owner noticed before we did. We now schedule the revert at the moment a temporary change is approved, with a dated line in the client's tracker, and the daily check marks any live budget that differs from the expected one as high priority. If you ask an agency for a one-day change, ask how it will be undone and who checks.
Budgets are not hard caps. Google's help page on average daily budgets says the daily spending limit on any particular day is two times the average daily budget for most campaigns, and the monthly limit is 30.4 times it. A day at nearly double the budget is normal behaviour. Judge spend over a week or a month, not by a single day.
To check your own account:
- Open the campaign's ad schedule and compare it with the days you intended.
- Look at spend by day of week for the last month.
- Write down any temporary change with a date to undo it and a name against it.
- Compare cost per click and clicks per day before and after any budget change, not only total spend.
Does a bigger Google Ads budget buy more clicks?
Not always. Before 1 October the budget on that account was lifted, aimed at the share of impressions the campaigns were losing to budget. Comparing September with the first five days of October:
| Measure | September | 1 to 5 October | Change |
|---|---|---|---|
| Spend per day | Baseline | Higher | Up about 8% |
| Clicks per day | 30.6 | 23.8 | Down about 22% |
| Average cost per click | Baseline | Higher | Up about 39% |
| Impression share lost to budget | 42.6% | 14.8% | Down 27.8 points |
| Impression share lost to rank | 34.7% | 63.7% | Up 29.0 points |
The lift did what it was meant to, since the share lost to budget fell sharply. The share lost to rank rose by almost as much, and overall impression share barely moved, from 22.7% to 21.5%. More money went in and fewer clicks came out. Our reading, not a proven cause, is that the budget cap had been hiding a different limit. Once the cap was removed, ad rank, which depends on bid and ad quality, was the bottleneck, and extra budget under a click-maximising strategy bought more of the expensive clicks. Five days is a short window and partly a weekend, so we would not build a theory on it alone. The practical point stands: "limited by budget" in the Ads interface does not mean more budget will fix the account. Check what is limiting you first. See also lost to budget or lost to rank.
Lesson 4: how much Google Ads spend goes to the wrong searches?
On a five day search terms report from one local appliance repair account, about 31 percent of the spend that Google named went to searches for work the business does not do. Nearly all of it came through broad and phrase match keywords, not exact ones. Google lists search terms only above a privacy threshold, and the report named searches for 56 of the 119 clicks. The rest sat under "other search terms" and could not be inspected, so 31 percent is a floor, not a total. Of the 375 rows, 42 had clicks.
These were searches for work the business does not do:
| Search | Match type | Clicks | Why it is waste |
|---|---|---|---|
| mobile auto electrician | Phrase close variant | 1 | Car electrician |
| mobile pink slip | Phrase close variant | 1 | Vehicle inspection |
| ford service | Phrase | 1 | Car service |
| cheap dryer | Broad | 2 | Buying a dryer, not repairing one |
| how to reseal freezer door | Broad | 1 | DIY |
| how to unblock a dishwasher that won't drain | Broad | 1 | DIY |
| delonghi service center near me | Phrase close variant | 2 | Coffee machines |
| bissell belt replacement | Phrase close variant | 1 | Vacuum cleaners |
That is eight of eleven wasteful terms. The account already held 22 negative keywords for coffee machines and 12 for vacuums, and searches for them still got through.
Why do exact match negatives fall behind?
Because they catch the precise search someone saw last month and not next month's variation. The account held 706 negative keywords, mostly short exact-match fragments, and the list kept growing without closing the leak. Adding a few category words as broad negatives at campaign level, such as car, vehicle, vacuum, coffee, "how to" and "cheap", excludes every search containing the word in any order. A word can also exclude something you want, so check it against the terms that converted before adding it.
Which searches look like waste and are not?
The same report contained terms a quick scan would exclude. Searches for parts, such as an oven element for a particular model, a fridge door shelf or rangehood filters, were customers because this business sells spare parts as well as repairing. Searches naming a brand, such as Fisher and Paykel, came from people looking for a repairer of that brand. A short term like "cost of oven repair" is a buyer asking a price. So the account has a standing rule not to add negatives for parts or spares. A generic negative list copied from another appliance business would have blocked paying customers, and we only knew because the owner told us what the business sells.
How should negatives be added to an account?
We do not change an account from the report alone.
- Pull the report for at least a week, so a single odd day does not drive decisions.
- Sort terms into keep, waste and unsure, and check the unsure ones against actual orders or enquiries.
- Propose each negative with the reason, and have the owner approve it before it goes in.
- Review again after two weeks for new leaks.
To read your own report, open Campaigns, then Insights and reports, then Search terms, for the last 30 days. Sort by cost, not clicks. Ask of each costly term whether it is the job you want. If the waste comes through broad and phrase match, the fix is in negatives and tighter match types. Keep a note of terms you must never exclude. If you work with an agency, ask whether the negative list you are paying to maintain is documented somewhere you can read.
Which Google Ads settings leak money for a tradie?
Four settings and habits cause most of the waste we find when we take over a local service account. Each has a Google Ads Help page behind it.
| What we found | Share or ratio | What to do | Google Ads Help |
|---|---|---|---|
| Clear waste in the visible search terms before we started: competitor names, retailers and services the business does not offer | About a quarter of visible search-term spend, on one account in one month | Add negatives for whole categories, not exact fragments | About negative keywords |
| One broad keyword | Two thirds of one campaign's spend, in September and again in a late-October week, with no tracked conversions while tracking was broken | Check spend by keyword weekly and move the term to exact or pause it | About negative keywords |
| Location option left on "Presence or interest" | Local-service ads shown to people outside the area | Switch to "Presence", which reaches people in or regularly in your targeted locations | About advanced location options |
| Ads sent to the homepage | On one account, paid visitors to the matching repair page converted better than those to the homepage: 9% against 2.9% for forms and 24% against 17.5% for phone | Send each ad group to the page for that job | n/a, from the site's own analytics |
The landing page row rests on 78 sessions to the repair page, so treat it as a direction. It is also why the vertical pages exist: Google Ads for tradies and the trade pages linked from it carry the landing-page side, and this guide covers the account side.
One more case from our own error. On a builder's account, phrase-match negatives for "renovation" blocked all eight keywords for major renovations for about ten days, with almost no spend, because a negative can switch off your own ads. Google shows a warning that is easy to miss. Check each proposed negative against your own keyword list before adding it.
Google's "missing relevant keywords" warning does not mean add more long-tail keywords. On one account 119 of 356 exact keywords were already flagged "low search volume", and the suggestion to remove "redundant" keywords included pairs that were not equivalent. Do not apply either in bulk.
What does Google Ads management cost?
Ad spend is yours and is paid to Google. On our plan you create your own Google Ads account, set your own payment method and accept our manager link. We never hold your card. Management is $549 a month, GST inclusive, month to month, on top of the $298 a month website plan. It covers campaign build, tracking, weekly care and a monthly report. For market ranges, see Google Ads management cost in Australia.
Read the Ads service page and the pricing page, or return to the guide to a website for tradies. To begin, get started.
Common questions
- Is Google Ads worth it for a tradie?
- It can be when the website turns clicks into calls and the tracking is accurate, and it is a poor use of money when either is broken. Nobody can promise leads, so start with a small budget and judge it on real enquiries.
- How much should a tradie spend on Google Ads?
- Ad spend is set by you and paid to Google directly. One regional builder we set up began at A$22 a day for service searches and A$8 a day for town name searches, which is a small test, not a recommendation. Management is a separate fee.
- How do I track phone calls from Google Ads?
- Count taps on a phone number link on your website, plus calls from the ad itself, as separate conversion actions. Test on a real phone, and check that tapping into a form box is not being counted as a call.
- Why do my Google Ads conversions look higher than my real enquiries?
- Some conversion actions are created by Google, such as taps on the call button in the ad or map activity, and they can be counted by default. On one account they made up about nine in ten of the conversions reported.
- What are negative keywords for a tradie?
- They tell Google not to show your ad for certain searches, such as DIY, the wrong trade or buying a product. Check any negative against the work you really sell before adding it, so you do not block paying customers.
- Do I need my own Google Ads account?
- On our plan, yes. You create the account, set your own payment method and pay Google for ad spend. We link to it as manager and charge a flat monthly fee for managing it.
Want a website that turns readers into customers?
A custom site, hosting and upkeep for one monthly fee, with your leads and Google results in a dashboard you can check any time.